The UT8806E is a 6½-digit Performance-Series bench digital multimeter with a 1,999,999-count display, 0.0035% basic DC voltage accuracy, True-RMS AC measurement, and a 10,000 readings/second maximum reading rate, shown on a 4.3-inch 480 × 272 TFT-LCD. It is the flagship of the UT8800E series.
DC voltage resolves to 0.1 µV and resistance to 10 µΩ, with four-wire (Kelvin) resistance to 1 GΩ, dual display, and a full math/statistics/dB/dBm/Pass-Fail suite across four display modes. Thermocouple and RTD temperature measurement spans −270 °C to 1820 °C with cold-end compensation, 32 Gb of NAND flash holds measurement files and setups, and SCPI control is available over LAN, RS-232, and USB with VXI-11 and USBTMC support.
It suits metrology-tier bench measurement, calibration support, and high-resolution R&D characterization where reading rate and accuracy matter at the same time.
| Display Digits | 6½ (6.5) |
| Resolution Count | 1,999,999 |
| Basic DC Voltage Accuracy | 0.0035% |
| DC Voltage Resolution | 0.1μV |
| DC Current Resolution | 1pA |
| Resistance Measurement Resolution | 10μΩ |
| Maximum Reading Rate | 10,000 rdgs/s |
| True-RMS | Yes |
| Auto-Ranging | Yes |
| Capacitance Range (max) | 100 mF |
| Frequency Counter Range | 3 Hz – 1 MHz |
| AC Frequency Response | 300 kHz |
| Temperature Range | -270°C to 1820°C |
| Temperature Accuracy | 0.5°C |
| Four-Wire Resistance | Yes |
| Dual Display | Yes |
| Math Operations | Statistics, Limits, Pass/Fail, dB, dBm, Relative |
| Internal Storage | 32 Gb NAND Flash |
| Display | 4.3in TFT LCD |
| Display Resolution | 480×272 |
| Touch Screen | No |
| Interface | LAN / RS-232 / USB-Host / USB-Device |
| Remote Command Set | SCPI (VXI-11, USBTMC, IEEE-488.2-style) |
| Certifications | CE | cETLus |
Manufacturer's Rep & National Distributor — Est. 2005
